PET-Serie

Precision adjustable

The adjustable DAMPTAC DTK series are widely used in the automotive industry, automation industry, etc. Diese Arbeit wurde in dieser Arbeit untersucht. Es gibt nicht, dass sie nicht nicht, dass sie sind. The DTK series is convenient in selection and flexible in application. Diese Arbeit wurde in dieser Arbeit untersucht. The development of the measurement of the development of the The first part of the thesis is the first part of the thesis: "The first part of the thesis is the first part of the thesis. The first part of the thesis is to develop a new model for the development of the DTK series.

• DTK is an adjustable model. There is not that they are not not only that they are not only that they are. The most ideal buffer effect can be achieved by setting.

There is not that they not not only that they not only. Es gibt nicht, dass sie nicht nicht, dass sie sind.

Es gibt nicht, dass sie nicht nicht, dass sie sind.

Diese Arbeit wurde in dieser Arbeit untersucht.

• Impact speed: 0.01 ~ 5 m/s (up to 20 m/s for customized special model)

• Ambient temperature:-10 ℃ ~ + 80 ℃ (special customized model-40 ℃ ~ + 120 ℃)

SPECIFICATIONS

Energy absorption 5.5 Nm/cycle-692 nm/cycle

Stroke 7 mm-50 mm

Impact velocity range 0.1 m/s to 5.1 m/s

Working environment temperature 10 °C to 80 °C.

Installed in any position, integrated end stop

The development of the development of piston rod: hard-coated reinforced steel; Piston rod cap: reinforced steel, anti-corrosion action of outer surface; Return spring: special spring steel; Accessories: QPQ

Damping medium: special hydraulic oil for damping deceleration

DTK1007-B, DTK1210-B, DTK1412-B, DTK2016-B, DTK2525-B, DTK2540-B, DTK2725F-B,

DTK2725-B, DTK3035-B, DTK3325-B, DTK3350-B, DTK3625-B, DTK3650-B

The Hin Weis

Diese Arbeit wurde in dieser Arbeit untersucht. Adjust the scale of the buffer to gear 1 and run the test again; If there is no improvement, continue to the 2nd. Alley, 3. Gear Set... When it is set to X gear, the moving load can be stopped quickly and smoothly, and there is only a "Poof" sound to be heard during the whole process. This thesis was developed to the use of the theory of the analysis of the theory of the theory. Hold that scale. In 1945 he was no different. If repeated settings and tests do not achieve the ideal damping effect, there is a problem with the buffer selection. A larger model may need to be replaced for testing. There is not that they do not not that they do not not only.

Automotive industry

Non-standardized automation industry

Pneumatic industry

Yes

Circuit breaker industry

Industry for the manufacture of household appliances

Battery industry